BOW IT!

I took a pair of sleeves and made myself a bow.

Here we have a vintage blouse that I adopted when my mother wanted to get rid of it, but that I am - lets face it- most likely never going to wear:

Unless we procrastinate a bit on everything else I have on the to-do list and tweak this one a little bit.

Snip snap off with the sleeves we go!

In general (and this is a true generalisation), short sleeves work best for me. So if an item is not being worn often enough shortening its sleeves often helps for me. You have seen me turn sleeves into pockets before on a dress and immediately earn plus points (equals wear-points) but if you can't make pockets, make a bow - in this case we will pimp up this blouse to get a pussy bow by making a ribbon from the sleeves.

In order for you to tie it properly into a bow around your neck and not just a knot (which could be quite nice as well) you need the ribbon, or tie,  to be at least about 110cm. One could make the ribbons such that they are sewn to, and begin at the front sides of the shirt, in whic case they could be shorterBut I wanted mine to be sturdy and go around my neck.

Because the sleeves are not long enough by themselves to make the tie in one (or two) I put it together of four pieces, two narrower to meet under the collar in the neck, and two that widen towards the edges, to be tied into tbe bow. You can see the seams where I sew the pieces together when the ribbon is hanging like this but it won't show when it is tied into a bow.

Hem the sleeves and voila! The shirt got wear-me points again!

So I wore it right away. Here with a RubyLea-turban and an old Zara skirt from 2009 or '10 (that does not have stretch and that I really, truly do wonder how it is possible I can still button in the waist, as it seems few other items from, umm, pre 2014 or so can be fastened without a painful inhalation, and sometimes not even that helps. Sniff.).

THE PEACH DRESS

This peachy/salmon pink dress is one of my favourite dresses. I've always had a thing for shirtwaist dresses and this one has pockets as well which kind of seals the deal. I bought it at a vintage store in Berlin when we were there with Eddi in 2010.

But -there's always a but - it is a bit too tight over the chest and is now hopefully next to my sewing machine waiting for alteration!

The top always was a bit on the smaller side and I'd often wear a slip of lace top underneath in order to be able to keep the buttons opened as far down as possible. But nowadays it just makes me look stuffed, so I can't really rely on that trick anymore.

I have been thinking about how to alter it to add spaced around the bust; adding a strip of fabric in the middle of the dress, under/next to the decorative panel that runs vertically across the top, or make it diamond shaped or so? Or do I just add more fabric from under the arms? The dress it's rather well made so I am afraid to fck it up. Any sewing wizards out there with advice?

DECEMBER PINEAPPLES

More ways of fighting the grey! (I'd like to say November but we are once again in a rainy +10C December it seems..). This time with the obvious anti grey wear -  a pineapple cardigan!

A soft yellow cardigan with two self-attached pineapples in the front. Also with a change in shine and texture around them in a shape strangely resembling an iron. Because all things are done best when done at one 1am when the urge to be creative (or to finally get around making that pineapple cardigan! And wearing it! Right now!) strikes!

I have had the pineapples waiting for a yellow cardigan for almost a year already. I now finally bought one (from Lindy Bop). The skirt in vintage. The pineapple patches were from ebay I think.

Once I was at it I did a lion shirt for Dag. He thinks it was a Christmas gnome, that visits the house during all december nights before Christmas, who left him the lion patch.

THE POCKETED DRESS

(*if to pocket was a verb, that is. In my world there surely would be use for such a verb, as I am all about pocketing.)

This dress did indeed get so much better for me by revamping the sleeves into pockets!
It will be worn a lot this summer.

DRESS-FIX: FROM SLEEVES TO POCKETS

One of my favourite clothing revamps is to turn sleeves into pockets!

If there's a piece of clothing in your closet that you for one reason or another have not worn in some time there comes a moment when you need to take it out and decide if you should do something about it or pass it on.

 I have a dress originally from Shabby Apple that I have not worn for almost three years (since Dag was a baby, oh man, how was he ever that tiny!!), although I like it.

It used to have long sleeves, but I always found that a bit hard to use, so I eventually chopped them off into short sleeves to solve the problem. I did not sew the edges of the new sleeves but folded them up and over with curtain tape for a seamless, folded finish. However, the sleeve was rather puffy and puffy sleeves make my arms look huge, so I did not end up wearing the dress any more than before anyway.

 But, as it is summer and as I have been coveting different striped shirt waist dresses here and there I decided to make this one totally wearable and awesome again! This by taking the sleeves off and turning them into pockets! This is something I have in line for a couple of other dresses too.

(If you wonder why I keep going on about pockets this and pockets that it is for practical reasons -  phone and car keys when out with a toddler and moving around in and out of the big house on the farm. Nothing beats clothing with pockets when you tend to wear mainly skirts or dresses)

 So just open up the seams and remove the sleeves.
Fix the edges around the sleeve holes.

 Cut pockets of the old sleeve.

Pin them in place - this was the hardest part here as the skirt is pleated; to get the pockets nicely over the pleats without ruining the shape of the skirt.

Sew them in place and voila! An almost new wonderful summer dress!


Wooh!

However, although I can be rather sciccors-happy my advice before revamping or cutting in any clothing you have is to think twice about it; I have sometimes made quick choices on what I wanted for the moment without thinking what was best for the garment itself, and then later regretted it. Obviously you can't always win as fashion and your own preferences change with time, but you can give everything a good though first.

MAKING OLD SHOES SHINE: THE SPARKLY VERSION

Suitably for DIY-season of the year (yes,  Christmas time) I was asked to collaborate with Yahoo! and get acquainted with and inspired by their Yahoo!DIY digital magazine - and then come up with my very own little do-it-yourself.*

Yahoo!DIY has a fresh and easy-to-navigate-trough layout, and is now full of eye candy along with lots of tips and tricks to DIY during the Holidays; gift and wrapping ideas, recipes, different decorations and more. I came across a post that mentioned both bling and glitter in the headline (on how to add a little extra glitter here and there without any mess) and as you know, bling and glitter has -apart from checks- been a theme here lately, so that was my thing! And I intended to add a LOT of glitter.

Some time ago I made an old pair of shoes fancier by adding rhinestones to them, and last week I pimped up a plain shirt by embellishing it -now it was time to spice up another pair of shoes: to glitter them up!

Glitter is something that growns on you. There was a point in life that if asked, I would have said that there can be such a thing as too much glitter. But nowadays, and especially at this time of year, I would say No, there simply can not be any such thing as too much glitter or bling. This often from a burlesque point of view, which is slightly ironic and full of the love of all things camp and kitsch. (And if you haven't noticed, Christmas is a very kitschy holiday.) But glitter, even when there is a lot of it, can still be stylish and classy too. And depending on how you choose to style a pair of glitter shoes, the result can be either wonderfully over-the-top or then very elegant. Or maybe even both.

Some of you may recall that crafting and I are not total bff’s, but that is only goes for certain areas of crafting. As I have accepted a lot more glitter in everyday life, I have also come to enjoy the bling up’s a lot more, to the extent that I sometimes start new projects and choose items to bling up without having an actual reason for it. But in this case there is very much reason - to give old shoes a new life. I have glittered up several pairs before and am often asked about how they've done.
So, here’s how I do it:

First take note that this will require a day or two - the steps are rather quick to do but the waiting in between takes time. So if you want to wear your blingy shoes for  Christmas you might be in a bit of a hurry, unless you start in 1-2-3-NOW! and yo might be able to wear then for Christmas day (which is, as I remember from the days when I was young and out and about all the time, the day to part-ey out on town.) But, even better, and as you perhaps might have a few other things on your hands righ tnow, make them in time for New year’s eve to definitely out-sparkle all other shoes in the room!

So - take out an old pair of shoes -or new ones if you so please, but wear them in first - and clean them up if needed. I find this works best on satin (or canvas) shoes, but basically you can do the same on any kind of material - this is also how I made the glitter surface for the (plastic) soles on my red heels that I embellished some time ago.

The pair I’m working on are a pair of by now rather sad looking dancing shoes I use on stage, but as I’ve said before; dance shoes are the most comfortable of heels as they are soft tand flex. In other words, perfect for parties as well!

You will need fabric embellishment glue, one that dries see trough and elastic. I go for my old pal Jewel-It. Then you'll need a brush to paint it on.

And, glitter. Heaps of glitter.

But don’t be chocked by the size here! For someone that pours glitter on herself and throws it in the air for a living, this is standard size and I go trough several of these a year.

A smaller size (that some perhaps may still refer to as a big jar of glitter? Hard to say when you have caught what we call glitter-herpes) will do fine, because in the end you will not need that much to cover your shoes, although the process requires quite a bit. You can smarten things up, and in the same time get by with less of a mess if you grab a few papers along for your working surface and an extra jar for the glitter.

First, fill your shoes with newspaper (or a few rolled nylon socks) in order to keep their shape and to not get messy on the inside. Start by covering one side of the shoe with glue; paint on a rather thin layer (it will sink in fast). Apply a second layer after a about ten minutes. Try to paint the glue on as even as possible - don’t make the layer too thick as the glitter will not attach evenly then, but make it thick enough still not to be soaked in straight away. It should leave a visible surface. (If you are working on another kind of material that won’t soak up the glue one layer is enough).

Fold a paper in half and open it up so that you have a little crease in the middle. Place the shoe on the paper and pour glitter on it. And I mean pour! Pour glitter on it like there is no tomorrow! Make it pile up! Glitter it like it’s 1999!

The shoe will look a bit over glittery and fuzzy, but it will not remain that way. Wait for some ten minutes again, and carefully lift the shoe and let the excess glitter fall off on your paper. Tap the heel and the toe a few times on the paper to get all the extras off.

To re-use your sparkle, fold the paper in half and pour the glitter back in your jar.

Leave the shoe lying on the side to dry while you start with your other shoe.

You can do the other side after an hour or two, depending on how well the first side has dried. Let that side dry too and then glue and pour gitter on the back of the shoes, leave them standing to dry. The glitter surface may look a bit uneven and weird, but fear not, this is only the first round.

You can speed up the drying process by gently blowing the shoes with a hair dryer. And I really want to stress it when I say ‘gently’ -keep the hairdryer on a good distance and on low effect; too hard a blow can make an uneven result as the glue-glitter mass can move. Also, do this away from your crafting table, unless you want to cover your whole house in glitter (which, depending on a lot of things, may not necessarily be a bad idea. But it’s not what were after here).

Your shoes are ready for the next coating after a few hours, or the next day. Paint on a new layer of glue, thick enough to cover all the glitter. It may seem like you are ruining the fine sparkle, but don’t worry, they will improve! Pour on glitter en masse again, wait a while, tap it off and let dry. Repeat on the other side and in the back. Let dry properly.

Two layers will most like be enough, or then go for a third, your choice.
You can choose to finish your project here and strut along in super glittery shoes already. Give them a light fix with hairspray or fixative (for coal crayons) before you head out.


I like it with a little less crisp and more smooth finish, that also makes them last longer, so I paint on one last layer of glue, thick enough to cover all the glitter, on. Once again you might get sceptic and think that you’ll ruin them, but don’t worry, as the glue dries the shoes will sparkle like whoa! again!

Like this!
Now dance the night away in shoes that would make Dorothy and her ruby slippers  jealous.

Some small extra tips and trix:

- you can mix two shades of glitter for more ‘depth’ to your sparkle, like a more yellow and a more brownish gold for exampe. Or red and fuchsia. Mix them in the jar you work with before pouring on.

-Bling your heels to the max by adding a few chrystals or rhinestones on top afterwards., for example in the front on a pair of sandals.

-Glitter just a section of you shoe,  the back and heel for example. Make sure to draw an exakt line with the brush when you put the glue on for a neat and pretty result, or then place place a trim /ribbon or a row of rhinestones on the edge to cover it.

For more crafts inspired from the magazine search for, or for sharing your own creations inspired by the posts use #yahooDIY

*) to be clear, this post has been sponsored by Yahoo! and I give my sincerest thanks for sponsoring me in the making of my glittered shoes. While this was a sponsored opportunity from Yahoo!, the idea of the post, it’s content and opinions expressed here are, of course, my own.

JOHNNY CASH MEETS LIBERACE, OR, THE BLING-UP OF A SHIRT

This season- a part from checks- it's all about blinging up old items over here. (Or, if you so will, plain new ones). No such thing as too much sparkle during the festive holidays!

Some weeks ago it was about putting some extra bling on a pair of heels, this time we'll spice up a shirt.

This shirt was originally made for a thing on stage, but since those moments would be very few and short in nature, I made it with the intention of being able to use it myself afterwards.

So you will need a shirt - I used a mens' slim fit shirt as I wanted it to be long - rhinestones of your choice, appliqué glue, some supporting fabric to iron underneath and a brush to apply the first layer of glue. Or, needle and thread if you come across those rhinestones that can be sewn on. (And if you're patient enough to do so). I used acrylic stones, they are lighter in weight; this shirt will need a lot of them. Your shirt will take 24 to 48 hours to make depending on weather you add your bling to just the front or also the back; the glue needs to dry properly before wearing.

First, cut the supporting fabric in the shape of the area you want to embellish (use a piece of  paper to get the shape right by trying it out on your shirt first and then transferring it to the support fabric), or a bit larger than that, and iron it in place. This shirt had double fabric at the back yoke so it did not require extra support.

Then, working first on one side, put glue on the area to be embellished. As you can see I placed a magazine under the area I am working on so the glue won't go trough to the opposite side.

I sparkled my shirt up in a western fashion but any pattern will look good; lines or dots or, yes,  lines forming...checks. Then you might want to draw them out first so they end up even and don't look like something your kid made you for father's /mother's day and that you were forced to wear. (Because, that's how it would end up for me at least.) I drew along the edge of the support fabric, which I had cut into exactly the shape of the area I wanted embellished.

I use Jewel-it glue for almost anything of this kind, it dries slowly to be fully transparent and elastic and the items can be washed.  So use that or any similar. But it will leave ugly stains if you drop it where it's not supposed to be, so be careful. The glue is best spread out with a brush - rinse the brush and put it in warm water immediately afterwards if you ever want to use it again (like, for the other side after a while).

Let the glue sink in for about ten minutes and then apply some more to the section you will start with.
I apply my stones with a pair of tweezers. Carefully lift the shirt a little bit every now and then so it does not stick to the surface underneath. Then on to the other side!

Let the shirt dry for an hour or two laying down until the glue is no longer white and then hang it to dry over night before wearing - or before doing the back (after which you of course will have to let it dry over night again).

The front of the shirt and the back the day(s) after. I did not put embellishment all the way over the shoulders because the shirt would then have turned very hard and bulky when worn.

I used 700 of the bigger sized stones (200 on each side in the front, 300 in the back, bought them at 2,50€/100pcs bag) and some 400 of the smaller ones (about ten euros). Whatever you chose to make, remember you will most likely need more pieces than you'd think of at first (unless this is everyday business for you), that goes for all embellishments.

And here's me wearing my western Cash goes Liberace-shirt!


This time with a pair of velvet capri leggings and red details, the next time perhaps with a pencil skirt.

MAKING OLD SHOES SHINE : THE BLINGY VERSION

It's the official party season. (Which for me is more of a work season; no time for parties.) All display windows ad billboards fill up with black and gold and red and glittery sparkly things for the season. Well, it's Christmas all year round in many ways for me (not just the lights here and there) as the amount of sparkly stuff  I nowadays have to drape myself in is, well, a lot. For all the obvious reasons.

I was blinging up an old pair of shoes for a show, but, this is of course something you can do without having to strut with them on stage in. You may remember my tip from some years back about attaching jewellery to a pair of heels? Another quick and easy way to bling a pair of shoes up is to use some rhinestones and glue and TA-DA, instant party shoes!

I normally use a fabric glue that is still elastic when it hardens but as the shoes I decided to pimp up are made of (faux) patent leather I used hot glue and pre-glued rhinestones instead. Because theses are for a themed act I put the bling on to resemble daisies. (I also made a glitter surface on the sole but we'll get back to that in another post.)



Be sure to clean the shoes before you start. The smaller rhinestones were pre-glued and came in lines (from Tiger)  which made this an easy task. Otherwise I use a chrystal pen or a pair of tweezers to grab and place the pieces.  Remember to be quick if you work with hot glue as it dries instantly - for bigger stones it's easy but for smaller ones that you might want to add in a formation (a line like here) I'd suggest another kind of glue that takes a little longer to dry. Haberdashery stores also sell rhinestones on a string, which would work nicely for this - the price per meter is high but you will not need so much for a pair of heels so it's doable.



And then it's just on with the heels and off to shine and sparkle!
(and yes I know, my working space is a mess as I, in my usual manner, am working on too many things at once...)

SMALL RED ADDITIONS

Dag's room. The one we've been working on only for about 14 months or so. And with working I mean not setting my foot in there apart from hanging up curtains there once in March, doing some occasional messy sewing and storing all my show-suitcases in. So he's still sleeping in our bedroom and playing all over the living room. In fact the whole flat has looked like shit not been too nice looking the last year. I'm too busy with everything and all the free time we spend at the farm. But as autumn always is my kind of new year I have actually done something about it; I've been organising my paper work and such to get it out of that room end elsewhere and started moving some of Dags things into the old study! Step by step, toddler steps.


We got him some basic wood furniture from ikea and pimped them up with some red. I still had some red spray paint left from when painting the heels on my boots red last winter, and coated the legs on the stool (that will work as a night stand) and the knobs on the chest with it. Quick and very painless!


The cat lamp has also finally found a real home. (And soon someone will even live in there!)